I know I'm a bit slow, but here you go, my first ever WIP post!
Torso is very fun to build! well, its identical with 00 Raiser.
Massive articulation. the chest can expand.
Hmm, spray painted the inner frame, which increases the friction on the chest rotation. hope it can solve the weight issue...
also, weathered the inner part where both "metal" meets.. You can't expect metals to be perfectly shinny with constant rotation... even with lubricant.. if you know what i mean....
Pick and spray paint with gun metal again! just like my previous PG Gundam Aile Strike 's inner frame.
Can you feel it coming??
Be careful when plugging in the "A" Sword Bits. The connection is really tight and when you take the bits off, the connector could possibly break. They have to go in and out with the groove.
ReplyDeletehmm.. A swords bits? are those the little green and blue bits?
Deletethanks for the heads up, I'll leave the little connector unpainted then,..
=]
The "A" Sword Bits are the biggest Sword bits the Qan[T] has, "B" being the medium sized bits and "C" the smallest. You're welcome.
ReplyDeleteAhhh yes, I found it here in the instruction manual. =D
DeleteAwesome.. thanks for commenting
this is one of my fav kits...but i didnt get it after hearing how unstable it is :( question...how do u spray the flat coat with those transparent parts? kinda hard not to let the coat cover the transparent part unless u using masking tape right?
ReplyDeleteahh.. its quite easy, just don't assemble any clear parts. Put the clear parts after final topcoat is done. no masking needed..
DeleteYup. If you top coat clear parts it turns foggy. You'll have to soak it in thinner to fix it.
Deletemmm meaning spray b4 u assemble the parts?
ReplyDeletewell you assemble.. but left out the clear parts when you Topcoat.
Delete